Vitec Multimedia HDM950 Guía de usuario descargar pdf (Pagina 60)

CONFIDENTIAL – This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.

LW Player User Guide v2.6 page 60 / 70

- Click right button to lock the value of the parameter right click on the desired channel and

select Read Only.

 DCA (Digital Control Amplifier): This parameter modifies the value of the group of Input

Channels.

Primary|Secondary Channel – Component Output

 Channel:

- HD-Primary channel: In this case, Component Output is routed on the Primary HD-SDI

channel. The HDMI video resolution/frame rates remains identical to the Primary HD-SDI

Channel Output (please refer to the diagram on page 4).

- SD-Secondary channel: In this case, Component Output is routed on the Secondary SD-

SDI channel. The HDMI video resolution/frame rates remains identical to the Secondary

SD-SDI Channel Output

 Analog Output Chroma Type:

- YPbPr: This mode is used to transmit video in YPbPr Chroma type.

Use three BNC connectors (Pr/R, Pb/B, Y/G) to plug a monitor to the board.

- CVBS_YC: This mode is used to transmit video in Y/C Chroma type.

Connect to the Y/G BNC connector to plug a monitor to the board.

- RGB: This mode is used to transmit video in RGB Chroma type.

Connect to the three BNC connectors (Pr/R, Pb/B, Y/G) to plug a monitor to the board.

 Chroma Phase (degrees):

Default value: 195

This parameter sets chroma phase of color burst signal for the composite/S-Video (in degrees

from 0 to 360 degrees).

 Burst Lock Phase:

Default value: 100

This parameter sets the location of the chroma burst for the analog outputs relative to

horizontal synch rising edge.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

Sin comentarios

Vitec Multimedia HDM950 Guía de usuario Pagina 60