Vitec Multimedia HDM950 Guía de usuario descargar pdf (Pagina 54)

CONFIDENTIAL – This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.

LW Player User Guide v2.6 page 54 / 70

Allows shifting picture by the value to conform to different NTSC’s Standard. (CEA-861D

specifies lines 22–261 and 285–524 for active video. IEC 61834-2, ITU-R BT.1618, and

SMPTE 314M (DV formats) specify lines 23–262 and 285–524 for active video. ITU-R

BT.656 specifies lines 20–263 and 283–525 for active video, resulting in 487 total active

lines per frame.)

 Disable Clipping of SDI Value:

Enable/Disable PLUGE Pattern for testing of SDI input. If SDI signal is out of band the

HDM board shows black or white picture on the output.

 Synchro Group Number:

Set a group number to join few boards in order to manage them synchronously.

 Disable Time Code Recalculation:

Default value is OFF – in this mode HDM board reduces the start time code to zero for a file

which start time code is different to 00:00:00:00.

Set ON if you need to keep the initial time code value as it is.

Primary Channel – HD-SDI Output

 Monitor Type:

Available modes:

- 16x9

- 4x3

 Out Resolution: Set the output resolution of the primary video channel.

Available resolutions:

o PAL, NTSC

o 720p25; 720p29,97; 720p30; 720p50; 720p59,94; 720p60

o 1080i23,976; 1080i24; 1080i25; 1080i29,97; 1080i30

o 1080p23,976; 1080p24; 1080p25; 1080p29,97; 1080p30;

1080p50; 1080p59,94; 1080p60

 Use AFD:

HDM850 transmits AFD (Active Format Description) information, which is contained in

decoded MPEG file.

 Fit Mode: Specify rules of picture transformation when input aspect ratio is different to

output aspect ratio.

- Fit to Output: stretch 4x3 to 16x9 or squeeze 16x9 to 4x3.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 69 70

Sin comentarios

Vitec Multimedia HDM950 Guía de usuario Pagina 54